QJSD210 – Quart


OTHER Cleaning And Surface Prep PRODUCTS

Easy Liquid Sander Deglosser

A fast, easy and non-messy alternative to sanding, Jasco® Easy Liquid Sander Deglosser is an effective way to prepare surfaces for painting and increase the adhesion of new finishes to old. The water-based, biodegradable formula works on paint, varnish, enamel and stain and is great when you are redoing kitchen cabinets, wood moldings and door facings.

 

DIRECTIONS FOR USE: 1. Wear chemical splash goggles. Shake well. Use full strength to saturate a coarse, lint-free cloth and rub surface in a circular motion. Fold and re-saturate cloth frequently to prevent re-depositing of soils. Kitchens and areas with heavy grease or wax build-up may require cleaning with TSP or a TSP substitute. 2. Apply new coating anytime after surface is dry (about 10 minutes).

IMPORTANT: Carefully read all cautions and directions before use.

HELPFUL TIPS: People with sensitive skin should wear chemical-resistant gloves. Product will leave a slight residue that can be painted over. Do not use on freshly finished surfaces, rubber or asphalt tile, synthetics, plastic, fiberglass or other solvent-sensitive surfaces.

STORAGE: Keep it in a cool, dry place, out of direct sunlight, at temperatures below 120°. Keep container closed when not in use. Do not reuse this container.

DISPOSAL: If container shows signs of deterioration, dispose of product. Dispose of empty containers and leftover product at your local household hazardous waste collection facility. If one is not available, dispose of in accordance with federal, state and local regulations.

CAUTION: HARMFUL IF SWALLOWED. EYE IRRITANT. Contains Dibasic Esters and Glycol Ether. Avoid contact with eyes, skin and mucous membranes. Do not take internally. Use only with adequate ventilation. If strong odor is noticed or you experience slight dizziness – STOP – ventilation is inadequate. Leave area immediately.

FIRST AID – IF SWALLOWED, immediately call your poison control center, hospital emergency room or physician for instructions. IN CASE OF EYE CONTACT, immediately flush with water, remove any contact lens, continue flushing with water for at least 15 minutes, then get immediate medical attention. IN CASE OF PROLONGED SKIN CONTACT, immediately wash with soap and water. If irritation persists, get medical attention.

KEEP OUT OF REACH OF CHILDREN

After I’ve applied Jasco® Easy Liquid Sander Deglosser, do I need to rinse it off before painting?
No rinsing is required — Jasco® Easy Liquid Sander Deglosser should be left on the surface and allowed to dry for ten minutes. The surface can then be painted.

I’m applying Jasco® Easy Liquid Sander Deglosser in a circular motion, according to the instructions, but the gloss isn’t coming off of the finish.
This is okay. As long as the product is applied properly, it will micro-etch the surface so that new paint will adhere.

Where can I purchase Jasco® Easy Liquid Sander Deglosser?
Check the “Find A Retailer” link at the top right of this page to find a local retailer. This product is typically sold in the paint section of Lowe’s Home Improvement stores.


The “Directions for Use” are included to help you better understand our product. However, they do not provide you with all of the information needed to use the product safely and effectively. Prior to using any of our products, you should always read the entire label including all cautions. A copy of the current label is linked to this webpage.